VFD ZONCN Z2000 Series 7.5KW 11KW Inverter
Basic product introduction:
· Senseless flux vector control(VC)V/F(Voltage/Frequency)control vfd
· The overload capacity allows for 60 seconds at 150% of the rated current and 3 seconds at 180% of the rated current.
· Ten auxiliary frequency sources are available.
· It enables precise adjustment of the auxiliary frequency and frequency synthesis.
· Supports PM motor (Z2000T series vfd)
· Optional inclusion of built-in EMC filter; Optional EtheCat communication.
· Power range: 110V/220V/380V/415V/440V/480V, ranging from 0.4kW to 450kW.
The new star in the field of industrial control - Z2000 vfd inverter
The performance of this product is amazing, the stability is impeccable, and there is no fault, which is a very important point in the field of industrial control!
Z2000 vfd inverter, first of all, its performance is absolutely first-class, no matter what kind of working environment, it can maintain stable operation, which is the envy of many peers! Secondly, its stability is also very excellent, there will be no failure, which allows us to rely on it in the process of use, without worrying about any problems.
Moreover, the design of the Z2000 vfd inverter is also very user-friendly, easy to operate, even novice can easily get started.
Technical Specification:
| Item | Z2000 series vfd inverter |
| Control mode | Senseless flux vector control(SFVC)；Voltage/Frequency(V/F) control |
| Maximum frequency | Vector control: 0-320Hz ; V/F control: 0-3200Hz |
| Carrier frequency | 1-16kHz ；The carrier frequency is automatically adapted according to the characteristics of the load. |
| Input frequency solution | Digital setting: 0.01Hz Analog setting: maximum frequency x 0.025% |
| Startup torque | G type: 0.5Hz/150%(SFVC) ； P type: 0.5Hz/100% |
| Speed range | 1:100 |
| Speed stability accuracy | ±0.5% |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current. P type: 60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto boost or Customized boost 0.1%-30.0% |
| V/F cure | Line V/F curve; Multi-point V/F curve; N-powor VI/F curve |
| V/F separation | Two types: complete separation; half separation |
| Ramp mode | Straight-line ramp; S-curve ramp;Four groups of acceleration/deceleration time with the range of 0.0-6500.0s |
| DC braking | DC braking frequency:0.0Hz to maximum frequency
Braking time: 0.0~100.0s ; Braking action current value: 0.0%~100.0% |
| JOG control | J0G frequency range:0.00-50.00Hz；JOG acceleration/deceleration time: 0.0~6500.0s |
Onboard multiple preset
speeds | lt implements up to 16 speeds via the simple PLC function or combination of X terminal states |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| Auto voltage regulation (AVR) | It has the ability to maintain a consistent output voltage even when there are fluctuations in the mains voltage. |
Auto voltage/Over current
stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive |
Product configuration:
| Close loop vector control | No |
| Built-in braking unit | Yes,below 37kw (include 37kw). Optional for more than 45KW |
| VF+Vector control | Yes |
| High speed pulse output | Yes |
| Movable digital keypad | Yes |
| AI | 2 |
| AO | 1 |
| DI | 6 |
| DO | Standard 1,optional 2 |
| Relay output | Standard 1,over 30kw optional 2 |
| DC braking | Yes |
| Collector | 1 |
| 24V power supply | Below 30kw optional,30kw and above support |
| EMC filter | Optional |
| 0.1S acceleration/deceleration | Yes |
| Simple PLC | Yes |
| All kinds of protection | Support |
| PID | Yes |
| DC choke | 30kw—220kw optional,250kw and above all have |
| DC bus +,- terminals | Yes |
| STO function | No |
| Communication | RS485 |
| EtheCAT communication | Optional |
| Certificate | KC+CE |
| Warranty | 18 months |
Product wiring diagram:
Product applications:
The Z2000 series finds extensive application in fans, pumps, compressors, lathes, spindle motors, textile machinery, food processing equipment, crushers, packaging machinery, printing machinery, washing machines, conveyor systems, grinding machines, polishing machines, and various other types of equipment. It has garnered positive feedback and satisfaction from customers.
Application:
FAQ:
Q1:What is your MOQ?
A: 1 pc
Q2:What's your terms of payment?
A:T/T 100% before delivery.
Q3:What's your delivery time?
A:Generally within 15 days after receiving full payment.
Q4:How can l get OEM/ODM order?
A:If your order quantity meets certain requirements, we are happy to customize it for you. We have cooperation with more than forty manufacturers.
Product Tags:
|
|
Vfd ZONCN Z2000 Series 7.5kw 11kw 380v Variable Frequency Inverters For Motor Speed Controller Images
|
